NPP vacuum retrofit kit
NEW Exhaust Commander All-in-1 bi-mode exhaust vacuum retrofit kit w/ remembers last setting mode available now!
Another Sunset Orange Creations innovation! ZERO DRAIN remembers last setting mode!
This is a new option available on the engine vacuum bi-mode exhaust retrofit kit that I have been selling since May 2008. Works on all C6's 2005-2009.
With this new bi-mode vacuum retrofit solution you get everything you need to control your retrofitted bi-mode exhaust and get the option to now have a ZERO DRAIN remembers last setting mode. Whatever position your butterflies are in when you turn the car off, is the position it returns to when you start the car again.
Using a special non-volitile memory, I have created a system that is fully powered off when the car is off so that there is no battery drain at all, yet it retains its memory so it comes back to life exactly as it was shut down. No other controller system available today can do this!
This kit includes the wireless controller with one button keyfob remotes, and all of the necessary vacuum lines, vacuum solenoid and wiring to complete the control system installation. It will give you full open / full closed modes and gives you the ability to switch between the modes instantly using the supplied One button wireless remotes.
Typical install time is around 1 or 2 hours. I have installed this kit on local cars in 30 minutes or less on jackstands.
Quick install summary:
1: The engine vacuum tap used is the correct GM bi-mode vacuum port on the back of the intake mainfold. Just like the NPP, Z06 and ZR1's use. Not the brake booster or other critical engine vacuum systems. The vacuum line is run from the engine to the vacuum solenoid unit and then you hook up the vacuum lines to the butterfly valves on the mufflers.
2: The wireless controller is located in the passenger fuse panel area, and power cable is run easily from the passenger footwell area to the rear of the car by tucking it underneath the trim panels.
3: You have the option to mount the vacuum solenoid box inside the car or outside depending on your install preference.
4: Start the car and enjoy your fully operational bi-mode exhaust system!
This is a great retrofit system for those who want to retrofit bi-mode exhaust to their C6 that didnt come with it. All you need its the All-in-1 kit and the bi-mode mufflers and you have a functioning bi-mode exhaust.
Get the Best bi-mode retrofit system available!
Order Here:
Exhaust Commander All-in-1 bi-mode exhaust vacuum retrofit kit
Feel free to contact us anytime.
Another Sunset Orange Creations innovation! ZERO DRAIN remembers last setting mode!
This is a new option available on the engine vacuum bi-mode exhaust retrofit kit that I have been selling since May 2008. Works on all C6's 2005-2009.
With this new bi-mode vacuum retrofit solution you get everything you need to control your retrofitted bi-mode exhaust and get the option to now have a ZERO DRAIN remembers last setting mode. Whatever position your butterflies are in when you turn the car off, is the position it returns to when you start the car again.
Using a special non-volitile memory, I have created a system that is fully powered off when the car is off so that there is no battery drain at all, yet it retains its memory so it comes back to life exactly as it was shut down. No other controller system available today can do this!
This kit includes the wireless controller with one button keyfob remotes, and all of the necessary vacuum lines, vacuum solenoid and wiring to complete the control system installation. It will give you full open / full closed modes and gives you the ability to switch between the modes instantly using the supplied One button wireless remotes.
Typical install time is around 1 or 2 hours. I have installed this kit on local cars in 30 minutes or less on jackstands.
Quick install summary:
1: The engine vacuum tap used is the correct GM bi-mode vacuum port on the back of the intake mainfold. Just like the NPP, Z06 and ZR1's use. Not the brake booster or other critical engine vacuum systems. The vacuum line is run from the engine to the vacuum solenoid unit and then you hook up the vacuum lines to the butterfly valves on the mufflers.
2: The wireless controller is located in the passenger fuse panel area, and power cable is run easily from the passenger footwell area to the rear of the car by tucking it underneath the trim panels.
3: You have the option to mount the vacuum solenoid box inside the car or outside depending on your install preference.
4: Start the car and enjoy your fully operational bi-mode exhaust system!
This is a great retrofit system for those who want to retrofit bi-mode exhaust to their C6 that didnt come with it. All you need its the All-in-1 kit and the bi-mode mufflers and you have a functioning bi-mode exhaust.
Get the Best bi-mode retrofit system available!
Order Here:
Exhaust Commander All-in-1 bi-mode exhaust vacuum retrofit kit
Feel free to contact us anytime.
Copyright 2009 Sunset Orange Creations. All rights reserved.
